Table of Contents
Advertisement
10
MULTIPULse Subsystem
MULTIPULse:PLAYBACK <character_data>
This command plays back the frames acquired from the multipulse, from the first
frame to the last frame.
Syntax
Parameter
Item
character_data
Example
MULTIPUL:PLAYBACK START
Remark
This command is only applicable in the multipulse mode. If this query is sent in
other modes, error –221,"Settings conflict;Required multipulse mode to set this
setting." will occur.
288
:PLAYBACK
MULTIPUL
Description/Defaul t
Sets the multipulse playback status as:
– START: Starts the playback.
– STOP: Stops the playback. This is the default setting.
Space
character_data
?
This command starts the multipulse
playback.
Keysight 8990B Programming Guide
Range of values
START
STOP
Advertisement
Table of Contents
