How To Record A Session - Keysight N9912A User Manual

 Frequency Counter at Marker is NOT allowed during Recording or Playback. Learn
About State and User Tags
When any of the State settings (listed above) are changed during a recording, a
'state tag' is inserted at the first trace number to be recorded with the new setting.
In addition, you can insert a 'User Tag' at any time during a recording session to
indicate an external event, such as when an antenna is moved. During playback, you
can move quickly to any of these tags, or scroll through these tags.
A symbol is used on the screen annotation to distinguish a User Tag from a State Tag
when scrolling through tags during playback.
Screen Annotation
During a record or playback session, the following is displayed in the top-left area of
the screen:
 AutoSession02: 92/95 (state 4/5)_*_
 where:





 When GPS is enabled and displayed, the current location and elevation are
NOTE If Recording or Playback is not occurring when you think it should, check the
following:
 Is the sweep in
 Is Recording or Playback
 Is the Record or Playback Interval set to a long delay? (Configuration settings.)

How to Record a Session

 Press Trace 6
 Then
 Optionally set resolution (points). Learn how on page 87. This can NOT be
 Then either:
108
about this feature on page 92.
Sep.22.2009 09:15:15 AM
is an auto-generated name for sessions.
AutoSession
number, incremented with each new session. The name can be changed using
Manage Sessions. Learn more on page 112.
is the current and total trace number: currently trace is 92 of 95 total traces.
92/95
is the current and total state tag or user tag number: 4 of 5 total tags.
state 4/5
(Asterisk) indicates that a state has changed.
*
has been inserted.
is the date and time of recording.
Sep.22...
annotated at the bottom of the playback display. Learn more about GPS on page
178.
? (upper-left annotation)
HOLD
Record Playback Setup
changed after a session is opened.
OR
New Session
o
then
Recall Session
o
#
Paused ? (mid-left annotation)
and select a session.
Open
is the auto-generated
02
(Pound) indicates that a User Tag
FieldFox User's Guide