Hotspot
5. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
6. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Change the default hotspot bandwidth limits
Required configuration items
Enable default hotspot configuration. See
n
instructions.
Maximum download speed, in Kbps.
n
Maximum upload speed, in Kbps.
n
To change the default hotspot IP address and subnet:
WebUI
1. Log into the Connect EZ WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Hotspots > hotspot.
4. For Maximum download speed, type the maximum download speed in kilobytes per second
(Kbps).
5. For Maximum upload speed, type the maximum upload speed in kilobytes per second (Kbps).
6. Click Apply to save the configuration and apply the change.
Digi Connect EZ 4/4i User Guide
Enable hotspot using the default configuration
Hotspot configuration
for
273