Add A Usb Serial Port - Digi TX54 User Manual

Serial port
9. Click Apply to save the configuration and apply the change.
The Apply button is located at the top of the WebUI page. You may need to scroll to the top of
the page to locate it.

Add a USB serial port

Your TX54 can be configured to support USB-to-serial adapters for serial access to the device, remote
serial out-of-band (OOB) access to other devices, or for use in python applications. The following USB-
to-serial chipsets are supported:
FTDI
n
Prolific
n
To add a USB serial port:

WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Serial.
TX54 User Guide
Add a USB serial port
197