Table of Contents
Advertisement
Interfaces
Show SureLink status for all OpenVPN clients
To show the SureLink status all OpenVPN clients, use the
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX40
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the Admin CLI prompt, type :
> show surelink openvpn all
OpenVPN Client Test
-------------- -------------------- ------------- ------------------
test_client1 194.43.79.74 (Ping) 29 seconds
test_client1 194.43.79.75 (Ping) 5 seconds
test_client2 194.43.79.74 (Ping) 21 seconds
test_client2 194.43.79.75 (Ping) 21 seconds
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Show SureLink status for a specific OpenVPN client
To show the SureLink status a specific OpenVPN client, use the
command:
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX40
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the
show surelink openvpn client name
OpenVPN client, for example:
> show surelink openvpn client test_client1
OpenVPN Client Test
-------------- -------------------- ------------- ------------------
test_client1 194.43.79.74 (Ping) 29 seconds
test_client1 194.43.79.75 (Ping) 5 seconds
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
IX40 User Guide
show surelink openvpn client all
Last Response Status
Passed
Passed
Failed
Waiting for result
show surelink openvpn client name
command to show the Surelink status of a specific
Last Response Status
Passed
Passed
Show SureLink status and statistics
command:
227
Advertisement
Table of Contents
