Table of Contents
Advertisement
Interfaces
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Show Surelink status for a specific OpenVPN client
To show the Surelink status a specific OpenVPN client, use the
command:
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX10
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the
show surelink openvpn client name
OpenVPN client, for example:
> show surelink openvpn client test_client1
OpenVPN Client
--------------
test_client1
test_client1
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
IX10 User Guide
command to show the Surelink status of a specific
Test
--------------------
194.43.79.74 (Ping)
194.43.79.75 (Ping)
Show Surelink status and statistics
show surelink openvpn client name
Last Response
Status
-------------
------------------
29 seconds
Passed
5 seconds
Passed
161
Advertisement
Table of Contents
