Solenoid; Right Deck Pickup Roller; Adjusting The Position Of The Right Deck Pickup Solenoid (Sl6) - Canon iR5000 Service Manual

CHAPTER 7 EXTERNALS AND CONTROLS

5.8 Solenoid

5.8.1 Right Deck Pickup Roller Releasing Solenoid (SL6)
1) Remove the left deck drive assembly.
2) Remove the waste toner bottle holder.
3) Remove the three screws [1], and detach
the cable support base [2].
4) Remove the two screws [3], and detach
the right deck pickup roller releasing
solenoid [4].

5.8.2 Adjusting the Position of the Right Deck Pickup Solenoid (SL6)

Adjust the position of the solenoid so that
the left edge of the arm 2 is 57.2 ± 0.5 mm
from the center of the hole A in the solenoid
mounting base.
7-40 P
COPYRIGHT © 2000 CANON INC.
F07-508-01
[3]
F07-508-02
F07-508-03
2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000
[1]
[2]
[4]
[A]
±
57.2 0.5mm