Table of Contents
Advertisement
3.3
Interrupts
3.3.1
Overview
In the H8/3857 Group, sources that initiate interrupt exception handling include 13 external
interrupts (WKP
to WKP
7
modules. In the H8/3854 Group, sources that initiate interrupt exception handling include 12
external interrupts (WKP
on-chip peripheral modules. Table 3.2 shows the interrupt sources, their priorities, and their vector
addresses. When more than one interrupt is requested, the interrupt with the highest priority is
processed.
The interrupts have the following features:
• Both internal and external interrupts can be masked by the I bit of CCR. When this bit is set to
1, interrupt request flags are set but interrupts are not accepted.
• The external interrupt pins IRQ
sensing or falling edge sensing.
, and IRQ
to IRQ
), and 16 internal interrupts from on-chip peripheral
0
4
0
to WKP
, IRQ
, IRQ
7
0
4
to IRQ
can each be set independently to either rising edge
0
4
, IRQ
, and IRQ
), and 14 internal interrupts from
3
1
0
Rev.3.00 Jul. 19, 2007 page 73 of 532
3. Exception Handling
REJ09B0397-0300
Advertisement
Table of Contents
