b) The MP2100 Window will be displayed. Select MP2100 under kind. Once the settings have been com-
pleted and checked, click the OK Button.
c) The Logical Port Setting Window will be displayed. Click the OK Button again. The screen will return
to the Communication Process Window. Check that MP2100 has been allocated to Logical PT number
1.
5. Saving Communication Port Settings
Save the communication port settings. These settings will be used as the communication port information
whenever the communication process is started. The procedure for saving the communication port set-
tings is shown below.
a) Click File – Save.
b) A save confirmation window will be displayed. Click the Yes Button.
3.1 System Startup
3
3-17