Xerox WorkCentre 5222 Service Manual page 1182

Chain-Link Name
719-008 Market Information
719-009 IISS Major Version
719-010 IISS Minor Version
719-011 IISS Revision Version
719-012 IISS Patch Version
719-013 ADF Major Version
719-014 ADF Minor Version
719-015 ADF Revision Version
719-016 ADF Patch Version
719-017 IPL Version
Controller & Fax NVM List
Chain-
Link Content
700-006 Configuration
700-061 Fax Card Available
700-064 Fax Card Available for Ch0
700-071 USB User Buffer Size
700-073 Page Memory Size
700-075 ART User Buffer Size
700-076 PostScript Buffer Size
700-078 Form Buffer Size
700-080 HPGL/Auto Layout Buffer Size
700-081 Parallel Buffer Size
700-082 Port9100 Buffer Size
700-083 Lpd Buffer Size
700-084 NetWare Buffer Size
700-085 AppleTalk Buffer Size
700-086 SMB Buffer Size
700-087 IPP Buffer Size
700-089 HDD Status
700-100 Forced Warmup Function Enable
700-109 Forced Warmup Mode
700-110 Forced Warmup Time (Hour)
700-111 Forced Warmup Time (Minute)
Launch Version
WorkCentre 5225, 5230
Table 3 Configuration
Default Range Remarks
0 0~4 0: FX, 1: AP, 2: XC, 3: XE, 4: SA *NVM value is updated when the power is turned on according to
the market information of the SystemCapabilitiesUpdate command
0 0~65535 IISS Major Version Number (Same as when downloaded)
0 0~65535 IISS Minor Version Number (Same as when downloaded)
0 0~65535 IISS Revision Version Number (Same as when downloaded)
0 0~65535 IISS Patch Version Number (Same as when downloaded)
0 0~65535 ADF Major Version Number (Same as when downloaded)
0 0~65535 ADF Minor Version Number (Same as when downloaded)
0 0~65535 ADF Revision Version Number (Same as when downloaded)
0 0~65535 ADF Patch Version Number (Same as when downloaded)
0 0~65535 IPL Version Number
Table 1 Common
Default Range
- 1~15
- -2~0
0=None 0~1
64KB 64~1024
- 64~256
32KB 32~2048
24MB (24x1024) 16~96
128KB 128~2048
64KB 64~5120
64KB 64~1024
256KB 64~1024
1024KB 1024~2048
256KB 64~1024
1024KB 1024~2048
256KB 64~1024
256KB 64~1024
- -2~0
0 0~1
0 0~1
23 0~23
59 0~59
February, 2008
6-43
Chain 700-xxx Common
Meaning
P(rinter), F(ax), C(opy), S(can) are allocated the following bits and are expressed in the fol-
lowing logic. P: 01, F: 02, C 04, S: 08. To differentiate between SP and MF-CSP, SP is allo-
cated 0x09.
0: Normal, -1: Error, -2: Not installed
0=None, 1=Available (Implemented on Host. Only automatic detection is necessary for Fax
card.)
[64KB~1MB] (32KB increments) Unit: Kbyte
bytes (Auto Set)
[32KB~2048KB] (32KB increments) Unit: Kbyte
[16MB~96MB] (0.25MB increments) Unit: Kbyte (Valid when PS option is available)
[128KB~2048KB] Unit: Kbyte
[64KB~5120KB] (32KB increments) Unit: Kbyte
[64KB~1MB] (32KB increments) Unit: Kbyte
[64KB~1MB] (32KB increments) Unit: Kbyte
[1MB~2MB] (32KB increments) Unit: Kbyte
[64KB~1MB] (32KB increments) Unit: Kbyte
[1MB~2MB] (32KB increments) Unit: Kbyte
[64KB~1MB] (32KB increments) Unit: Kbyte
[64KB~1MB] (32KB increments) Unit: Kbyte
[0: Installed, -1: Failed, -2: Not installed] (Auto Detect)
0: Cannot be set, 1: Can be set
0: Disable, 1: Enable
0 to 23 (Hour)
0 to 59 (Minute)
General Procedures
IIT NVM List