Xerox WorkCentre 5222 Service Manual page 1269

Chain-Link Name
071-002 TRAY2 LIFTER UP(FEED MOTOR
Reverse)
071-003 TRAY3 LIFTER UP(FEED MOTOR
Reverse)
071-004 TRAY4 LIFTER UP(FEED MOTOR
Reverse)
071-007 TRAY1 FEED MOTOR
071-008 TRAY2 FEED MOTOR
071-012 SMH FEED CLUTCH
071-036 MAIN MOTOR ON
071-037 DRUM MOTOR ON
073-006 T/A MOTOR
073-009 TRAY3 FEED MOTOR
073-010 TRAY4 FEED MOTOR
073-013 TM T/A CL
073-016 DUP MOTOR
073-018 HOT-LINE CHECK with alternative signal -
073-019 TRAY3 FEED MOTOR(Hot-Line)
073-020 TRAY4 FEED MOTOR(Hot-Line)
073-026 DUP MOTOR Rotate for sending paper
out to regi
089-002 REGI CLUTCH
091-002 BCR AC BIAS
General Procedures
Component Control
Table 2 Output Component Control Codes IOT
Connector
Level Meaning
- Turn Lift Up Motor on for two sec-
onds when Tray 2 Level Sensor is
''L''(lifted down). Lifter Motor will not
rotate when Tray 2 Level Sensor is
''H''(lifted up).
- Turn Lift Up Motor on for two sec-
onds when Tray 3 Level Sensor is
''L''(lifted down). Lifter Motor will not
rotate when Tray 3 Level Sensor is
''H''(lifted up).
- Turn Lift Up Motor on for two sec-
onds when Tray 4 Level Sensor is
''L''(lifted down). Lifter Motor will not
rotate when Tray 4 Level Sensor is
''H''(lifted up).
- Same as Name
- Same as Name
L Same as Name
L Same as Name
L Same as Name
L Same as Name
- Same as Name
- Same as Name
L Same as Name
- In high speed (> process speed)
Hot-Line Control MCU toggles
FEED-STOP signal alternatively in
period of 400-600ms, Tray Module
toggles FEED-READY signal in
period of 1900-2100ms.
L Hot-Line Control
L Hot-Line Control
- In low speed (=process speed)
L Same as Name
- Same as Name
February, 2008
6-130
Timer Off Cycle Operation Remarks
O X Not Available
O X Not Available
O X Not Available
X X Not Available
X X Not Available
X X Not Available
X X Not Available
X X The BCR AC, BCR DC, DEVE DC and BTR
output simultaneously. * CF=53-45(CL=751-
560) to 1 (single output) enables indepen-
dent outputs.
X X Not Available
X X Not Available
X X Not Available
X X Not Available
X X DM
O X Not Available
X X Not Available
X X Not Available
X X DM
X X Not Available
X X The BCR AC, BCR DC, DEVE DC and BTR
output simultaneously. * CF=53-45(CL=751-
560) to 1 (single output) enables indepen-
dent outputs.
Launch Version
WorkCentre 5225, 5230