REP 4.1.2 Toner Cartridge
Parts List on
PL 4.1
Removal
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
To prevent data loss when the power is turned off, please note the following.
FAX Models
Check that the "Stored Documents" lamp is not on, and press the Job Status button to ensure
that there are no jobs in progress.
Printer Models
Check that "Ready to Print/Send" is displayed on the Control Panel display.
1.
Open the Front Cover.
2.
Remove the Toner Cartridge.
(Figure
1.Remove the Toner Cartridge.
Repairs and Adjustments
REP 4.1.2
WARNING
CAUTION
1)
Figure 1 Removing the Toner Cartridge (j0st40403)
Replacement
1.
To install, carry out the removal steps in reverse order.
February, 2008
4-24
Launch Version
WorkCentre 5225, 5230