Orientation Of 2 Gears And Stack Height Sensor Flag (J0St41728); Installing The Bushing And E-Ring (J0St41722) - Xerox WorkCentre 5222 Service Manual

Shaft Gear
Install the E-
position on Pin-
ring
ion Gear
Figure 15 Orientation of 2 Gears and Stack Height Sensor Flag (j0st41728)
10. Install the Bushing onto the front end of the Set Clamp Shaft and install the E-ring.
16)
Launch Version
WorkCentre 5225, 5230
Pinion Gear
Flag
position
Figure 16 Installing the Bushing and E-ring (j0st41722)
11. Ensure that the Set Clamp Holder Springs are connected.
(Figure
February, 2008
4-151
Install
the
Bush-
ing and
the E-
ring
(Figure 17)
Repairs and Adjustments
REP 16.2.13