Removing The Bearing (J0Fa42204); Removing Bearing (0Fa42206); Removing The Paddle Link Assembly (J0Fa42205); Removing Shaft Assembly (J0Fa42207) - Xerox WorkCentre 5222 Service Manual

6. Remove the rear Bearing. (Figure 4)
(1)Remove Bearing.
Figure 4 Removing the Bearing (j0fa42204)
7. Remove the Paddle Link Assembly.
(1)Remove Paddle Link Assembly.
Figure 5 Removing the Paddle Link Assembly (j0fa42205)
Repairs and Adjustments
REP 22.3.1
(Figure 5)
8. Remove the Bearing. (Figure
(1)Remove E-Clip.
(2)Remove Bearing.
Figure 6 Removing Bearing (0fa42206)
9. Remove the Shaft Assembly.
(1)Remove Paddle Belt from Pulley.
(2)Remove Shaft Assembly in the direction of the arrow.
Figure 7 Removing Shaft Assembly (j0fa42207)
February, 2008
4-176
6)
(Figure 7)
WorkCentre 5225, 5230
Launch Version