Hooking On The Spring; Rep 15.6.1 Nudger Roll, Feed Roll - Xerox WorkCentre 5222 Service Manual

Figure 9 Hooking on the spring
Repairs and Adjustments
REP 15.4.2, REP 15.6.1

REP 15.6.1 Nudger Roll, Feed Roll

Parts List on PL 15.6
Removal
NOTE: The Feed, Retard and Nudger Rolls must be replaced at the same time.
1. Open the Top Cover Assembly.
2. Remove the Feed Upper Chute.
1. Remove the screw (1).
2. Remove the Feed Upper Chute.
3. Precautions during Installation:
A. Insert the Boss into the U-groove.
B. Insert the Tab into the Tab Slot.
February, 2008
4-120
(Figure 1)
Launch Version
WorkCentre 5225, 5230