116-352 Netware Software Rap; 116-353 Hdd Mechanical Rap - Xerox WorkCentre 5222 Service Manual

116-352 NetWare Software RAP

An internal shutdown occurred after a NetWare processing error.
Initial Actions
Power Off/On
Procedure
Pull out and insert or replace the DIMM
If the problem persists reload Software (ADJ
If the problem persists, replace the ESS PWB
Status Indicator Raps
116-352, 116-353
(PL 9.2).
9.3.1).
(PL 9.2).

116-353 HDD Mechanical RAP

A mechanical error occurred in the HDD.
Initial Actions
Power Off/On
Procedure
Check the connection of each ESS PWB connector. The connectors are correctly connected.
Y N
Connect the connectors.
Turn on the power again. The problem persists.
Y N
Return to Service Call Procedures.
Check the HDD electrical connections
If the problem persists perform
If the problem persists replace the HDD
February, 2008
2-604
(PL 9.2).
Hard Disk Diagnostic Program.
(PL 9.2).
WorkCentre 5225, 5230
Launch Version