Xerox WorkCentre 5222 Service Manual page 1212

Chain-
Link Content
785-081 DADF Elevator Tray Active Mode
Chain 790-xxx UI
Chain-
Link Content
790-001 Start Up Display Setting
790-002 Function Set Display Setting
790-003 FAX Broadcast / Multi-Poll Display
790-005 Ad Hoc Address Enable
790-019 Pause Print Job Cancel Timer (By Con-
nected Accessory)
790-050 Preset Tray 1 in Copy
790-051 Preset Tray 2 in Copy
790-052 Preset Tray 3 in Copy
790-056 EWB - Web Access v2.0
790-057 EWB - Access Permission
790-058 EWB - Init Cookie
790-059 EWB - Init Cache
790-060 Preset Reduce/Enlarge 1 in Copy
790-061 Preset Reduce/Enlarge 2 in Copy
790-063 EWB - Java Script
790-064 EWB - Cache
790-065 EWB - Verify Cache
790-066 EWB - Verify Cookie
790-067 EWB - TLS 1.0
790-068 EWB - SSL 2.0
790-069 EWB - SSL 3.0
Launch Version
WorkCentre 5225, 5230
Table 8 IIT
Default Range
1 1~2
Table 9 UI
Default Range
0 0~2
1 (DC) 0~255
0 (MF/P)
1: Display 0~1
0 0~1
15 1~59
1 0~255
2 0~255
5 0~255
0 0~1
0 0~1
0 0~1
0 0~1
R/E Preset 2 (FX, AP) R/E Preset 3 0~12
(XC) R/E Preset 4 (XE): 3
R/E Preset 7 (FX, AP) R/E Preset 5 12
(XC) R/E Preset 6 (XE): 5
1 0~1
1 0~1
0 0~3
2 0~2
1 0~1
1 0~1
1 0~1
February, 2008
Meaning
1: The earlier of (A) or (B) shall be the trigger: (A) When a specified time (set in NVM)
elapses since the Document Set Sensor was turned On. The timer will be reset if the Origi-
nal Document Guide is moved (i.e., if the level of the APS Sensor on Tray 1 to 3 changes). A
change in the level while the Tray is moving upward is disregarded. (B) When the Start but-
ton is pressed while the Document Set Sensor is On.
2: Only when the Start button is pressed while the Document Set Sensor is On.
Meaning
0: Settings List, 1: Job Management, 2: Machine Information
0: Menu, 1: Copy, 2: FAX/iFAX, 3: Scan to E-mail, 4: Scan to Mailbox, 5: Scan to
Server, 6: Scan to PC, 7: BOX, 8: Print, 9: Job Flow Service, 10: Job Memory, 11:
Multi Service, 12: Gemini, 13: DocuShare, 14: Media Print (Digital Camera Print),
15: Media Print (Text Print), 16: CUI_IFAX, 17: BM LinkS
0: Do not display, 1: Display
0: Do not inhibit, 1: Inhibit
1 to 59 seconds
0: None (not in use) 1: Tray 1, 2: Tray 2, 3: Tray 3, 4: Tray 4, 5: MPT, 6: Tray 6
(HCF1), 7: Tray 7 (HCF2)
Same as above
Same as above
0: Do not operate in old version (v2.0), 1: Operate
0: Cannot access general websites, 1: Can access general websites
0: Do not perform, 1: Perform
0: Do not perform, 1: Perform
0: None 1~12: R/E Preset 1 ~ R/E Preset 12
Same as above
0: Do not use Java Script, 1: Use Java Script
0: Do not use cache, 1: Use cache
0: Check automatically, 1: Check each time when displaying a page, 2: Check only
once after the initiation when displaying a page, 3: Do not check
0: Disable cookie (Do not use cookie), 1: Enable cookie (Use cookie), 2: Check data
saving each time cookie is received
0: Do not use TLS 1.0, 1: Use TLS 1.0
0: Do not use SSL 2.0, 1: Use SSL 2.0
0: Do not use SSL 3.0, 1: Use SSL 3.0
6-73
General Procedures