Removing The Lens Cover (J0St41135); Disconnecting The Ccd Flat Cable (J0St41109) - Xerox WorkCentre 5222 Service Manual

2.Remove the Lens Cover.
Figure 2 Removing the Lens Cover (j0st41135)
4. Disconnect the CCD Flat Cable. (Figure
1.Take off the hook.
2.Disconnect the CCD Flat Cable.
Repairs and Adjustments
REP 11.4.1
3)
Figure 3 Disconnecting the CCD Flat Cable (j0st41109)
5. Replace the Lens Kit Assembly.
1. Remove the screws (x4).
2. Replace the Lens Kit Assembly.
February, 2008
4-66
(Figure 4)
WorkCentre 5225, 5230
Launch Version