116-380 Ess Font Rom Dimm #1 Rap; 116-381 Abl Initialize Rap - Xerox WorkCentre 5222 Service Manual

116-380 ESS Font ROM DIMM #1 RAP

An error is detected when the Font ROM DIMM #1 was checked.
Initial Actions
Power Off/On
Procedure
Pull out and insert the Printer PWB (PL
The problem persists.
Y N
Return to Service Call Procedures.
Check the connection of each ESS PWB connector. The connectors are correctly connected.
Y N
Connect the connectors.
Turn on the power again. The problem persists.
Y N
Return to Service Call Procedures.
Replace the ESS PWB (PL 9.2)
If the problem persists, replace the Printer PWB
If the problem persists, replace the PS DIMM
Launch Version
WorkCentre 5225, 5230
9.2) and the PS DIMM (PL 9.2) Switch on the power.
(PL 9.2)
(PL 9.2).

116-381 ABL Initialize RAP

Corrupted data is detected in the ABL (Address Book Library).
Initial Actions
Power Off/On
Procedure
Check the connection of each ESS PWB connector. The connectors are correctly connected.
Y N
Connect the connectors.
Turn on the power again. The problem persists.
Y N
Return to Service Call Procedures.
Clear the ESS NVM. (Perform this only after explaining to the user the purpose of clearing recipient
information.)
If the problem persists replace the ESS PWB
February, 2008
2-617
(PL 9.2).
Status Indicator Raps
116-380, 116-381