071-211 Tray 1 Broken Rap; 071-940 Tray 1 Lift Up Rap - Xerox WorkCentre 5222 Service Manual

071-211 Tray 1 Broken RAP

BSD-ON:7.1
The Tray 1 Paper Size Switch failed.
Initial Actions
• Reload the tray correctly.
• Check the operation of the tray actuator.
• Power OFF/ON
Procedure
Remove Trays 1 and 2. Replace Tray 1 with Tray 2. [071-211] occurs.
Y N
Replace the faulty part of the Tray 1 Actuator.
Check the installation of the Tray 1 Paper Size Switch. The Tray 1 Paper Size Switch is
installed correctly.
Y N
Install the Tray 1 Paper Size Switch correctly.
Go to the OF 2 (SIZE SWITCH ASSY RAP).
Launch Version
WorkCentre 5225, 5230

071-940 Tray 1 Lift Up RAP

BSD-ON:7.1
The Tray 1 Level Sensor does not turn on within the designated time.
Initial Actions
• Remove and reinsert Tray 1
• Realign paper in the tray
• Object other than paper is in the tray
Procedure
1. Tray Level Sensor
2. Drive system from motor to bottom plate
February, 2008
2-523
Status Indicator Raps
071-211, 071-940