Xerox WorkCentre 5222 Service Manual page 1275

Tabloid black-and-white multifunction printer

Hide thumbs Also See for WorkCentre 5222:

Table of Contents

If IOT Built-in PG is specified, 2 Sided (Dup) is prohibited when specifying MPT.

Table 3 Pattern Overview

Pattern Name

Paper Feed Alignment Adjust-

ment pattern (Grid Pattern)

Table 4 Parameter settings available for pattern output

051 Paper Feed Alignment Adjustment

pattern (Grid Pattern)

Controller generated

052 Total Chart

(*1):Length is longer than A4 length and breadth is longer than Letter breadth.

(*2): Displays 294mmx17inch (A3 breadth x Ledger length) (means that A3 and Ledger are

both supported sizes)

General Procedures

Test Pattern Print

Built-in Image

Objective / Overview

For IOT Regi Adjustment

20mm interval/line spacing 0.2 +/-

For adjustment and isolating the

A4 or Letter

(*3):Refer to the specifications described in Detection.

Pattern Name

IIT Fast Scan Ink Gradation

IIT Slow Scan Ink Gradation

Shading Data Output

1 dot-wide grid

2dot-wide grid

4dot-wide grid

Fast Scan 256 Gradation

Slow Scan 256 Gradation

February, 2008

Table 5 IIT Pattern Overview

WorkCentre 5225, 5230

Launch Version

Workcentre 5225 Workcentre 5230