Removing The Retaining Clip From The Nudger Roll; Removing The Nudger Roll Shaft And The Nudger Roll - Xerox WorkCentre 5222 Service Manual

Retraining
Clip
Figure 3 Removing the retaining clip from the Nudger Roll
5. Remove the Nudger Roll Shaft and remove the Nudger Roll.
Repairs and Adjustments
REP 15.6.1
Nudger Roll Shaft
(Figure 4) 6. Retract the Nudger Roll by rotating the Torque Limiter inboard gear.
7. To remove the Feed Roll, remove the locking tab.
February, 2008
4-122
Figure 4 Removing the Nudger Roll shaft and the Nudger Roll
(Figure 5)
Launch Version
WorkCentre 5225, 5230