Removing The Front Or Rear Tamper Home Sensor (J0St41733); Removing The Bracket (J0St41733); Rep 16.2.25 Front/Rear Tamper Home Sensors; Rep 16.2.26 Compiler No Paper Sensor - Xerox WorkCentre 5222 Service Manual

REP 16.2.25 Front/Rear Tamper Home Sensors

Parts List on PL 23.12
Removal
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
1. Remove the Compiler Tray Assembly.
2. Turn the Compiler Tray over on a work surface.
3. Disconnect the connector.
4. Remove the Front or Rear Tamper Home Sensor.
Figure 1 Removing the Front or Rear Tamper Home Sensor (j0st41733)
Launch Version
WorkCentre 5225, 5230
WARNING
(REP 16.2.13)
(Figure 1)
(PL 23.12)

REP 16.2.26 Compiler No Paper Sensor

Parts List on PL 23.12
Removal
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
1. Remove the Compiler Tray Assembly.
2. Turn the Compiler tray over on a work surface.
3. Remove the screw (1) that secures the bracket.
Rear
Tamper
Home
Sensor
1
Discon-
nect the
connec-
tor
4. Disconnect the connector.
5. Remove the screw (1) that secures the sensor.
6. Remove the Compiler No Paper Sensor.
February, 2008
4-159
WARNING
(REP 16.2.13)
(PL 23.12)
Figure 1 Removing the Bracket (j0st41733)
(Figure 2)
REP 16.2.25, REP 16.2.26
(Figure 1)
Remove
the
screw
(1)
Repairs and Adjustments