REP 16.2.10 Sub Paddle Solenoid Assembly
Parts List on
PL 23.10
Removal
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
1.
Remove the Eject Cover.
(REP
16.2.5)
2.
Remove the Sub Paddle Solenoid Assembly.
a.
Disconnect the connector.
b.
Remove the wires from the wire clamps
c.
Remove the screw (1) from the Sub Paddle Solenoid Assembly.
d.
Remove the Sub Paddle Solenoid Assembly.
Figure 1 Removing the Sub Paddle Solenoid Assembly (j0st41736)
Launch Version
WorkCentre 5225, 5230
WARNING
REP 16.2.11 Finisher Stapler Move Motor
Parts List on
PL 23.8
Removal
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
1.
Remove the Finisher Stapler Assembly.
2.
Remove the Screws (2).
1
Discon-
nect the
Connec-
tor
2
Remove
wires
from
wire
clamp
Screws
3
Remove
the
screw
(1)
February, 2008
4-141
WARNING
(REP
16.2.12)
(Figure
1)
Figure 1 Removing the Screws (2) (j0st41697)
REP 16.2.10, REP 16.2.11
Repairs and Adjustments