Figure 1 Loosening the belt tension
7.
Move the motor unit.
(Figure
2)
1.
Disconnect the connector.
2.
Remove the screws (3).
3.
Remove the guide.
4.
Remove the Stud Screw.
5.
Move the motor unit.
6.
Remove the belt.
Repairs and Adjustments
REP 15.8.1
8.
Open the chute.
9.
Remove the Feed Guide.
1.
Remove the screws (2).
2.
Remove the Feed Guide.
February, 2008
4-126
Figure 2 Moving the motor unit
(Figure
3)
WorkCentre 5225, 5230
Launch Version