Fax Output Separation; General Procedures - Xerox WorkCentre 5222 Service Manual

FAX Output Separation

This procedure provides a method for customer to easily identify FAX output.
Procedure
If colored paper is available, load colored paper in Tray 1 SEF.
NOTE: FAX and FAX reports are printed on SEF by default.
To prevent the machine from feeding Short Edge Paper (Color), when copying Short Edge
Documents (on Platen Glass or DADF) set the Tray 1 Paper Attributes as "Custom1" and
Paper Type Priority as "Second ".
Customer can perform following steps if system admin is accessible with code 11111, or code
is available.
1. Press the Log In / Out Button on the Control Panel and enter 11111 using the number
keypad and select Enter.
2. Select the Tools tab.
3. Select System Settings.
4. Select Common Settings on the Group list.
5. Select Paper Tray Settings on the Features list.
6. Select Paper Type Priority.
7. Select Custom Paper 1.
8. Select Change Setting and select Second.
9. Select Save.
10. Select Close.
11. Select Paper Tray Attributes.
12. Select 1. Tray 1 and select Change Settings.
13. Use custom paper.
14. Select Confirm.
15. Press the Features button.
Launch Version
WorkCentre 5225, 5230
February, 2008
6-139

General Procedures

FAX Output Separation