a.
Remove the Gear Assembly
b.
Disconnect the connector
a
Remove the Gear Assembly
Figure 2 Disconnecting the connector
7.
Remove the chute.
(Figure
3)
1.Remove the screws (x2).
2.Remove the chute.
Repairs and Adjustments
REP 2.5.1
b
Disconnect the connector
February, 2008
Figure 3 Removing the chute (j0st40202)
8.
Remove the Takeaway Roll.
(Figure
1.Remove the KL-Clip.
2.Slide out the Takeaway Roll.
4-14
4)
Launch Version
WorkCentre 5225, 5230