024-981 Finisher Top Tray Full - Xerox WorkCentre 5222 Service Manual

A
Y N
Repair the open circuit or short circuit.
Replace the Stacker Motor (PL 22.8). If the problem persists, replace the Finisher PWB
(PL 22.7).
Replace the Finisher PWB (PL 22.7). If the problem persists, replace the MCU PWB
Launch Version
WorkCentre 5225, 5230

024-981 Finisher Top Tray Full

Finisher top tray is full
Initial Actions
Remove paper from the Finisher Top Tray.
(PL 9.1).
Procedure
If the failure continues, check for proper operation of the Stack Height Sensor. (BSD 12.8)
February, 2008
2-365
Status Indicator Raps
024-980, 024-981