Xerox WorkCentre 5222 Service Manual page 1190

Chain-
Link Content
700-549 Auditron Conceal User ID
700-550 Auditron Conceal Account ID
700-551 Remote Authentication Mode for Scan
700-552 Remote Authentication Service
700-553 Guest Password
700-555 KDC Server Port Number
700-556 KDC FQDN
700-557 KDC Realm Name
700-558 DV Pay for Print Forced Store
700-559 DV Pay for Print XPJL Command Enable
700-560 DV Pay for Print Error Account Action
700-561 DV Pay for Print Job Command Enable
700-562 No Account User Print Permission
700-563 User Auth Error Max Number for Auth Lock 5
700-564 User Auth Error Max Number for Access
Log
700-566 KDC Server Port Number-2
700-567 KDC FQDN-2
700-568 KDC Realm Name-2
700-580 KDC Server Port Number-3
700-581 KDC FQDN-3
700-582 KDC Realm Name-3
700-584 KDC Server Port Number-4
700-585 KDC FQDN-4
700-586 KDC Realm Name-4
700-588 KDC Server Port Number-5
700-589 KDC FQDN-5
Launch Version
WorkCentre 5225, 5230
Table 1 Common
Default Range
0: False 0~1
0: False 0~1
0: Off 0~1
0: Kerberos 0~4
(Windows2000)
guest
88 0~65535
Null character
Null character
0=Off 0~2
0=Disable 0~1
0=Cancel 0~1
0=Disable 0~1
0=Disable 0~1
0~10
10 0~600
88 0-65535
Null
Null
88 0-65535
Null
Null
88 0-65535
Null
Null
88 0-65535
Null
February, 2008
6-51
Meaning
0: False, 1: True
0: False, 1: True
0: Off, 1: On
0: Kerberos (Windows2000), 1: Kerberos (Solaris), 2: Authentication Agent, 3: LDAP, 4:
SMB
4~12 characters (7Bit ASCII)
Values between 1~65535
Can be entered in FQDN/IPv4/IPv6 literal format. The character string shall be null-termi-
nated. Restrictions: Only 1-byte alphanumerical characters, 1-byte hyphens (-) and dots (.)
used in the address as separators, and colons (:) can be used. 1-byte hyphens (-) cannot be
used at the beginning or the end of the character string.
Character string of 64 bytes or below
0=Off, 1=On, 2=Forcibly store print job (with user ID for authentication as a key)
0=Disable, 1=Enable
0=Cancel, 1=Store
0=Disable, 1=Enable
0=Disable, 1=Enable
0~10
0~600
Value from 1 to 65535
Can be entered in FQDN/IPv4/IPv6 literal format. The character string shall be null-termi-
nated. Restrictions: Only 1-byte alphanumerical characters, 1-byte hyphens (-) and dots (.)
used in the address as separators, and colons (:) can be used. 1-byte hyphens (-) cannot be
used at the beginning or the end of the character string.
Characters in 64 bytes or below
Value from 1 to 65535
Can be entered in FQDN/IPv4/IPv6 literal format. The character string shall be null-termi-
nated. Restrictions: Only 1-byte alphanumerical characters, 1-byte hyphens (-) and dots (.)
used in the address as separators, and colons (:) can be used. 1-byte hyphens (-) cannot be
used at the beginning or the end of the character string.
Characters in 64 bytes or below
Value from 1 to 65535
Can be entered in FQDN/IPv4/IPv6 literal format. The character string shall be null-termi-
nated. Restrictions: Only 1-byte alphanumerical characters, 1-byte hyphens (-) and dots (.)
used in the address as separators, and colons (:) can be used. 1-byte hyphens (-) cannot be
used at the beginning or the end of the character string.
Characters in 64 bytes or below
Value from 1 to 65535
Can be entered in FQDN/IPv4/IPv6 literal format. The character string shall be null-termi-
nated. Restrictions: Only 1-byte alphanumerical characters, 1-byte hyphens (-) and dots (.)
used in the address as separators, and colons (:) can be used. 1-byte hyphens (-) cannot be
used at the beginning or the end of the character string.
General Procedures