4.
Remove the Bracket from the Staple Assembly.
(1)Remove Screws (2).
(2)Remove Bracket.
Figure 2 Removing the Bracket (j0fa42220)
Replacement
1.
Reverse the removal procedure for replacement.
Repairs and Adjustments
REP 22.4.2, REP 22.4.3
(Figure
2)
February, 2008
REP 22.4.3 Set Clamp Home Sensor
Parts List on
PL 22.4
Removal
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
1.
Remove the A-Finisher from the machine.
2.
Remove the Rear Cover.
(PL
3.
Disconnect the Connector.
(Figure
(1)Release Clamp and remove the wires.
(2)Disconnect Connector.
Figure 1 Disconnecting Connector (j0fa42221)
4-182
WARNING
(REP
22.1)
22.1)
1)
WorkCentre 5225, 5230
Launch Version