Xerox WorkCentre 5222 Service Manual page 882

Figure 1 Disconnecting the connectors
4. Remove the DADF Document Tray.
1. Remove the Tapping Screws (1).
2. Remove the Tray Holder.
3. Remove the DADF Document Tray.
4. Pull out the Wire Harness.
Launch Version
WorkCentre 5225, 5230
(Figure 2)
Figure 2 Removing the DADF Document Tray
Replacement
1. To install, carry out the removal steps in reverse order.
February, 2008
4-105
Repairs and Adjustments
REP 15.2.1