Removing The Finisher Pwb (J0St41684); Removing The Finisher Lvps (J0St41691); Rep 16.2.21 Finisher Pwb; Rep 16.2.22 Finisher Lvps - Xerox WorkCentre 5222 Service Manual

REP 16.2.21 Finisher PWB

Parts List on PL 23.16
Removal
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
1. Remove the Rear Upper Cover. (REP
2. Remove the Finisher PWB. (Figure
a. Disconnect the Connectors (9).
b. Remove the Screws (5).
c. Remove the Finisher PWB.
Screws
Connectors
Finisher PWB
Figure 1 Removing the Finisher PWB (j0st41684)
Replacement
1. Reverse the removal procedure for replacement.
Launch Version
WorkCentre 5225, 5230
WARNING
16.2.3)
1)

REP 16.2.22 Finisher LVPS

Parts List on PL 23.16
Removal
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
1. Remove the Rear Lower Cover.
2. Remove the Finisher LVPS.
a. Disconnect the Connectors (2).
b. Remove the Screws (4).
c. Remove the Finisher LVPS.
Finisher LVPS
Screw
Screws
Figure 1 Removing the Finisher LVPS (j0st41691)
Replacement
Reverse the removal procedure for replacement.
February, 2008
4-157
WARNING
(REP 16.2.4)
(Figure 1)
Connector
Screw
Screw
Connector
Repairs and Adjustments
REP 16.2.21, REP 16.2.22
Screw
Screw