4.
Disconnect the connector.
(Figure
2)
1.Disconnect the connectors (x5).
Figure 2 Disconnecting the connector (j0st41106)
5.
Remove the IIT/IPS PWB.
(Figure
3)
1.
Remove the screws (x6).
2.
Remove the screws (x2).
3.
Remove the IIT/IPS PWB.
Repairs and Adjustments
REP 11.3.2
Figure 3 Removing the IIT/IPS PWB (j0st41107)
Replacement
1.
To install, carry out the removal steps in reverse order.
February, 2008
4-64
Launch Version
WorkCentre 5225, 5230