Removing The Bottom Plate (J0Fa42267); Removing The Finisher Entrance Sensor Assembly (J0Fa42225); Removing The Finisher Entrance Sensor (J0Fa42226) - Xerox WorkCentre 5222 Service Manual

5. Remove the Bottom Plate. (Figure
(1)Release Clamps (5) and remove the wires.
(2)Disconnect Connectors (8).
(3)Remove wires from Hooks (4).
(4)Remove Screws (4).
(5)Remove Bottom Plate.
Figure 2 Removing the Bottom Plate (j0fa42267)
6. Remove the Finisher Entrance Sensor Assembly.
(1)Disconnect Connector.
(2)Remove Tapping Screw.
(3)Remove Finisher Entrance Sensor Assembly.
Launch Version
WorkCentre 5225, 5230
2)
(Figure 3)
Figure 3 Removing the Finisher Entrance Sensor Assembly (j0fa42225)
7. Remove the Finisher Entrance Sensor.
(1)Remove Finisher Entrance Sensor from Bracket.
Figure 4 Removing the Finisher Entrance Sensor (j0fa42226)
Replacement
1. Reverse the removal procedure for replacement.
February, 2008
4-187
(Figure 4)
Repairs and Adjustments
REP 22.5.2