Removing The Rear Tamper Home Sensor Assembly (J0Fa42283); Removing The Rear Tamper Home Sensor (J0Fa42284) - Xerox WorkCentre 5222 Service Manual

7. Remove the Bottom Plate. (Figure
(1)Release Clamps (5) and remove the wires.
(2)Disconnect Connectors (8).
(3)Remove wires from Hooks (4).
(4)Remove Screw (4).
(5)Remove Bottom Plate.
Figure 2 Moving the Bottom Plate (j0fa42267)
8. Remove the Rear Tamper Home Sensor Assembly.
(1) Release Clamps (2) and remove the wires.
(2) Remove Tapping Screw.
(3) Move Rear Tamper Home Sensor Assembly.
(4) Disconnect the Connector.
Figure 3 Removing the Rear Tamper Home Sensor Assembly (j0fa42283)
Repairs and Adjustments
REP 22.9.5
2)
(Figure 3)
9. Remove the Rear Tamper Home Sensor.
(1)Remove Rear Tamper Home Sensor from the Bracket.
Figure 4 Removing the Rear Tamper Home Sensor (j0fa42284)
Replacement
1. Reverse the removal procedure for replacement.
February, 2008
4-212
(Figure 4)
Launch Version
WorkCentre 5225, 5230