033-717 Fax Control Rap; 033-718 Fax Control Rap - Xerox WorkCentre 5222 Service Manual

033-717 Fax Control RAP

BSD-ON:16.1/17.1
Verification of the specified password failed.
Procedure
Perform following as required
1. Verify machine is connected to dedicated analog line (not ISDN).
2. Verify that no password is set.
Customer can perform following steps if system admin is accessible with code (five one's)
11111, or code is available.
a. Press the Log In / Out Button on the Control Panel and enter (five one's) 11111 using
the number keypad and select Confirm.
b. Select System Settings.
c. Select System Settings again.
d. Select FAX Mode Settings.
e. Select Local Terminal Settings.
f. Check that 3. Machine Password is (not set).
If it is (not set), select close/exit as required. Go to step 3.
If a password is set, go to step 3.
g. Select 3. Machine Password and select Change Settings.
h. Select Backspace as required to delete the password.
i. Select Save.
j. Select Close/Exit as required.
k. Select Close again.
l. Select Close again.
m. Power machine off and on to verify setting change.
3. Initialize NVM.
Status Indicator Raps
033-717, 033-718

033-718 Fax Control RAP

BSD-ON:16.1/17.1
The document does not exist in the Polling Send box or the specified mailbox.
Initial Actions
Power Off/On
Procedure
Ask customer to cancel the job and resend.
February, 2008
2-432
Launch Version
WorkCentre 5225, 5230