Gp 9 Key Operator Log In - Xerox WorkCentre 5222 Service Manual

GP 9 Key Operator Log In

Description
This procedure describes how to log in as a Key Operator.
Procedure
1. Press the Log In/Out button on the control panel.
2. Enter 11111 using the number keypad.
NOTE: 11111 is default password. The key operator may have changed the password.
If the Authentication feature is enabled, you may be required to enter an Authentication
password. The default Authentication password is xadmin.
NOTE: If the password is changed, and is not available, the current password is stored in
NVM Read/Write [700-171].
3. Select Confirm on the UI.
4. To operate the machine select User Mode on the UI.
General Procedures
GP 9
February, 2008
6-150
Launch Version
WorkCentre 5225, 5230