024-939 Ohp Kind Mismatch; 024-946 Tray 1 Out Of Place Rap - Xerox WorkCentre 5222 Service Manual

024-939 OHP Kind Mismatch

OHP file sheet checked by OHP sensor for white edges after feed start. If while edges are
detected, a jam occurs.
Initial Actions
Use OHP film sheets whose edges are white.
Procedure
Job is not OHP job but paper is OHP film.
Job is OHP but paper is not OHP.
OHP with white edges detected
Status Indicator Raps
024-939, 024-946

024-946 Tray 1 Out Of Place RAP

The Tray 1 Paper Size Switch detected no tray.
Initial Actions
• Refer to BSD 7.1.
• Reload the tray correctly.
• Check the operation of the tray actuator.
Procedure
Remove Trays 1 and 2. Replace Tray 1 with Tray 2. [024-946] occurs.
Y N
Replace the faulty part of the Tray 1 Actuator.
Check the installation of the Tray 1 Paper Size Switch. The Tray 1 Paper Size Switch is
installed correctly.
Y N
Install the Tray 1 Paper Size Switch correctly.
Go to the BSD 7.1 Tray 1 Paper Size Sensing and check the connectors.
February, 2008
2-350
Launch Version
WorkCentre 5225, 5230