123-317 Receive Message Queue Rap; 123-318 Receive Finish Queue Rap - Xerox WorkCentre 5222 Service Manual

123-317 Receive Message Queue RAP

The data received from the Controller exceeded the upper limit of the processing capability in the
UI.
Initial Actions
Power Off/On
Procedure
Disconnect and reconnect the electrical connections on the UI PWB
the ESS PWB (PL 9.2)
If the problem persists reload Software (ADJ
If the problem persists replace the UI PWB
If the problem persists replace the ESS PWB
Launch Version
WorkCentre 5225, 5230
(PL 11.2) and
9.3.1).
(PL 11.2).
(PL 9.2)

123-318 Receive Finish Queue RAP

The data received from the Controller exceeded the upper limit of the processing capability in the
UI.
Initial Actions
Power Off/On
Procedure
P/J388 on Disconnect and reconnect the electrical connections on the UI PWB
the ESS PWB (PL 9.2)
If the problem persists reload Software
If the problem persists replace the UI PWB
If the problem persists replace the ESS PWB
February, 2008
2-641
(PL 11.2) and
(ADJ 9.3.1).
(PL 11.2).
(PL 9.2)
Status Indicator Raps
123-317, 123-318
P/J388 on