Iqs5 Side Edge Registration Specification; Specification Of Lead Edge Registration - Xerox WorkCentre 5222 Service Manual

Table 1 Specification of Lead Edge Registration
Configuration Range
DADF (Simplex) +/-2.2mm
DADF (Duplex) +/-3.0mm
Launch Version
WorkCentre 5225, 5230

IQS5 Side Edge Registration Specification

Procedure
Use Side A of the Standard Test Pattern.
For a copy that is folded in half, the crease in the copy should be within the following ranges from the center line of a 100% copy
(Figure 1).
Table 1 Specification of Side Edge Registration
Configuration Range
Platen (Simplex) +/-2.1mm
Platen (Duplex) +/-2.5mm
Platen (MPT) +/-3.0mm
February, 2008
3-15
Figure 1 Side Edge Registration(j0st3208)
Image Quality