123-372 Interface Sequence Rap; 123-373 Channel Rap - Xerox WorkCentre 5222 Service Manual

123-372 Interface Sequence RAP

The initialization command from the Controller was not sent within the specified time.
Initial Actions
Power Off/On
Procedure
Disconnect and reconnect the electrical connections on the UI PWB
the ESS PWB (PL 9.2)
If the problem persists reload Software (ADJ
If the problem persists replace the ESS PWB
Status Indicator Raps
123-372, 123-373
(PL 11.2) and P/J388
9.3.1).
(PL 9.2).

123-373 Channel RAP

There is an error in the channel sent from the Controller.
Initial Actions
Power Off/On
Procedure
on Disconnect and reconnect the electrical connections on the UI PWB
the ESS PWB (PL 9.2)
If the problem persists reload Software
If the problem persists replace the ESS PWB
February, 2008
2-652
(PL 11.2) and
(ADJ 9.3.1).
(PL 9.2).
Launch Version
WorkCentre 5225, 5230
P/J388 on