035-713 Fax Protocol Rap; 035-714 Fax Protocol Rap - Xerox WorkCentre 5222 Service Manual

035-713 Fax Protocol RAP

BSD-ON:16.1/17.1
No response signal was returned from the receiving Fax after the FTT (Failure To Train) signal
was sent.
Procedure
Fax phone line may also carry a DSL (Digital Subscriber Line) internet signal, but this is not
supported by the hardware. Fax requires an analog only phone line (can be used for voice
only).
Status Indicator Raps
035-713, 035-714

035-714 Fax Protocol RAP

BSD-ON:16.1/17.1
A DCN (Disconnect) signal was returned from the receiving Fax to the NSC/DTC (Non-Stan-
dard Facilities Command/Digital Transmit Command) signal sent from the Fax controller for
one of the following:
• Incorrect password
• No originals for polling
• Paper jam on the receiving Fax
Procedure
There is a problem with the receiving Fax. Ask customer to cancel the job and resend.
February, 2008
2-474
Launch Version
WorkCentre 5225, 5230