Removing The Lower Chute (J0St41308); Removing The Tray 4 Feeder (J0St41309) - Xerox WorkCentre 5222 Service Manual

3. Remove the screws (x2).
4. Remove the Lower Chute.
Figure 4 Removing the Lower Chute (j0st41308)
7. Remove the Tray 4 Feeder. (Figure
1. Remove the screws (x2).
2. Remove the bracket.
3. Remove the screw.
4. Remove the bracket.
5. Remove the screw.
6. Remove the bracket.
Launch Version
WorkCentre 5225, 5230
5)
Figure 5 Removing the Tray 4 Feeder (j0st41309)
Replacement
1. To install, carry out the removal steps in reverse order.
2. When replacing, enter Diag. mode. Clear the counter.
HFSI Chain Link 954-803
February, 2008
4-95
Repairs and Adjustments
REP 13.4.1