Setting The Dip Switch (J0St41314); Rep 13.8.1 Ttm Pwb - Xerox WorkCentre 5222 Service Manual

REP 13.8.1 TTM PWB

Parts List on PL 13.8
Replacement
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
To prevent data loss when the power is turned off, please note the following.
FAX Models
Check that the "Stored Documents" lamp is not on, and press the Job Status button to ensure
that there are no jobs in progress.
Printer Models
Check that "Ready to Print/Send" is displayed on the Control Panel display.
1. When replacing the TTM PWB, set the TTM PWB Dip Switch to the position as shown.
(Figure 1)
Repairs and Adjustments
REP 13.8.1
WARNING
CAUTION
Figure 1 Setting the Dip Switch (j0st41314)
February, 2008
4-100
Launch Version
WorkCentre 5225, 5230