Figure 2 Removing the MPT Feed Roll (j0st40704)
4.
Remove the MPT Retard Pad.
(Figure
1.Remove the springs (x2).
2.Remove the MPT Retard Pad.
3.Pull out the shaft.
Repairs and Adjustments
REP 7.2.1
3)
Figure 3 Removing the MPT Retard Pad (j0st40705)
Replacement
1.
To install, carry out the removal steps in reverse order.
February, 2008
4-36
Launch Version
WorkCentre 5225, 5230