Xerox WorkCentre 5222 Service Manual page 1202

Chain-
Link Content
770-116 IP Address
770-117 Subnet Mask
770-118 WINS Server Address 1
770-119 WINS Server Address 2
770-120 WINS Auto Config
770-122 Gateway Address
770-126 IPv6 Validate Flag for Manual Configuration 0
770-127 IPv6 Address Prefix Length for Manual
Configuration
770-128 IPv6 Address for Manual Configuration
770-129 IPv6 Gateway Address for Manual Configu-
ration
770-130 Agent Port Enable
770-131 Agent Transport Flag
770-133 Agent Community Name 1 ~ 10
770-135 lpd Valid IP Address 1
770-136 lpd Valid IP Address 2
770-137 lpd Valid IP Address 3
770-138 lpd Valid IP Address 4
770-139 lpd Valid IP Address 5
770-140 EWS Port Enable
770-151 IPv6 Access Control
770-152 IPv6 Address 1 for Auto Configuration
770-153 IPv6 Address 2 for Auto Configuration
770-154 IPv6 Address 3 for Auto Configuration
770-155 IPv6 Address 1 Prefix Length for Auto Con-
figuration
770-156 IPv6 Address 2 Prefix Length for Auto Con-
figuration
770-157 IPv6 Address 3 Prefix Length for Auto Con-
figuration
770-158 IPv6 Link Local Address
Launch Version
WorkCentre 5225, 5230
Table 5 I/O Port Protocol
Default Range
Null
Null
Null
Null
DHCP
Null
0~1
0 0~128
Null
Null
1: Enable 0~1
2: UDP 0~3
NULL (Replace with
"fxSystemMgr" on the
PDU)
Null
Null
Null
Null
Null
1: Enable 0~1
0 0~1
Null
Null
Null
0 0~128
0 0~128
0 0~128
Null
February, 2008
6-63
Meaning
Valid only in the case of IPv4 Protocol. Entry is possible in IPv4 literal format. The character
string shall be null-terminated. Restrictions: only 0 to 9 and dots (.) can be used.
Valid only in the case of IPv4 Protocol. Entry is possible in IPv4 literal format. The character
string shall be null-terminated. Restrictions: only 0 to 9 and dots (.) can be used.
Valid only in the case of IPv4 Protocol. Entry is possible in IPv4 literal format. The character
string shall be null-terminated. Restrictions: only 0 to 9 and dots (.) used in the address as
separators can be used.
Valid only in the case of IPv4 Protocol. Entry is possible in IPv4 literal format. The character
string shall be null-terminated. Restrictions: only 0 to 9 and dots (.) used in the address as
separators can be used.
0x10: Manual setting, 0x02: DHCP
Valid only in the case of IPv4 Protocol. Entry is possible in IPv4 literal format. The character
string shall be null-terminated. Restrictions: only 0 to 9 and dots (.) can be used.
0: Disable this function, 1: Enable this function
0 to 128 bits
Indicates IPv6 address in (null-terminated) literal format
Indicates IPv6 address in (null-terminated) literal format
0: Disable, 1: Enable
0: Both Off, 1: IPX, 2: UDP, 3: Both On
JISX0201 character code (12 characters)
IPv4 address in (null-terminated) literal format will be stored. Default is null.
IPv4 address in (null-terminated) literal format will be stored. Default is null.
IPv4 address in (null-terminated) literal format will be stored. Default is null.
IPv4 address in (null-terminated) literal format will be stored. Default is null.
IPv4 address in (null-terminated) literal format will be stored. Default is null.
0: Disable, 1: Enable
0: Disable access control, 1: Enable access control
Indicates IPv6 address in (null-terminated) literal format
Indicates IPv6 address in (null-terminated) literal format
Indicates IPv6 address in (null-terminated) literal format
0 to 128 bits
0 to 128 bits
0 to 128 bits
Indicates IPv6 address in (null-terminated) literal format
General Procedures