024-919 Face Up Tray Close Rap; 024-920 Face Down Tray 1 Paper Full Rap - Xerox WorkCentre 5222 Service Manual

024-919 Face UP Tray Close RAP

When output was sent to the Face Up Tray, the Face Up Tray was detected as closed.
Initial Actions
Open the Face Up Tray.
Procedure
Check the connection of each Exit PWB
Check that the P/Js on the MCU PWB (REP
Status Indicator Raps
024-919, 024-920
(PL 9.1) connector.
9.1.1) are securely connected.

024-920 Face Down Tray 1 Paper Full RAP

Face Down Tray 1 full of output sheets.
Initial Actions
Open the Face Down Tray 1 and remove output sheets.
Procedure
Check the connection of each Exit PWB
Check that the P/Js on the MCU PWB
February, 2008
2-346
(PL 9.1) connector.
(REP 9.1.1) are securely connected.
Launch Version
WorkCentre 5225, 5230