Xerox WorkCentre 5222 Service Manual page 995

5. Remove the Bottom Plate. (Figure
(1)Release Clamps (5) and remove the wires.
(2)Disconnect Connectors (8).
(3)Remove wires from Hooks (4).
(4)Remove Screws (4).
(5)Remove Bottom Plate.
Figure 2 Removing the Bottom Plate (j0fa42267)
6. Remove the Eject Clamp Home Sensor.
(1)Release Clamp and remove the wires.
(2)Disconnect Connector.
(3)Remove Eject Clamp Home Sensor from the Bracket.
Figure 3 Removing the Eject Clamp Home Sensor (j0fa42288)
Repairs and Adjustments
REP 22.10.3
2)
(Figure 3)
Replacement
1. Reverse the removal procedure for replacement.
February, 2008
4-218
Launch Version
WorkCentre 5225, 5230