Lift Up The Retard Roll Shaft; Removing The Retard Roll - Xerox WorkCentre 5222 Service Manual

Figure 2 Lift up the Retard Roll Shaft
3. Remove the Retard Roll. (Figure 3)
Repairs and Adjustments
REP 15.4.1
Figure 3 Removing the Retard Roll
Replacement
1. Install the Shaft into the Torque Limiter and then into the Retard Roll.
1. The shaft.
2. The Retard Roll.
3. The Torque Limiter.
February, 2008
4-114
Raise the Retard
Roll and remove
(Figure 4)
Launch Version
WorkCentre 5225, 5230