024-926 Punch Dust Box Miss Set
Detected the Finisher Punch Dust Box missing
Initial Actions
Install the Finisher Punch Dust Box.
Procedure
Check the Punch Box Set Sensor or proper operation. BSD 12.15
Check that the Punch Dust Box is properly seated.
Status Indicator Raps
024-926, 024-928
024-928 Scratch Sheet Compile
Illegal sheet in the output to the Compiler.
Initial Actions
Clear Scratch Sheet from the A-Finisher and restart the job.
Procedure
Check for proper operation of the Finisher Entrance Sensor
Check the
P/J8704
connector at the Finisher PWB
Check the connector
P/J416
February, 2008
2-348
(PL
22.5)(BSD 12.3)
connector on the IOT. (BSD 12.3)
Launch Version
WorkCentre 5225, 5230